OSS

Sound is NOT built into base of MicroCore, TinyCore or CorePlus, sound is implemented via extensions.

Assuming you are a newbie, select ossxmix from the Apps and choose onboot. On reboot, you are likely to have sound.
If you have installed a desktop eg LXDE, you can drag into your desktop folder using your filemanager, the file is called ossxmix.desktop.
Your desktop icon is named

OSS_GTK2_mixer.

The desktop (or icon) files are in

/usr/local/share/applications

Otherwise, you can click on empty desk space, choose Applications and name of mixer is called

OSS_GTK2_mixer

If you prefer commands, open a terminal and run command

ossxmix

For more advanced users, if you do not want a GTK download choose OSS from apps and reboot.

Warning: This is written for newbies, its not meant to be a pure recommendation but
is the personal opinion of aus9 to minimise forum posts where newbies can't do something
because they may be trying to use OSS when something might be better or vice versa.

If you need skype –> ALSA (and suggest no Pulseaudio)
If you need to change sound devices on-the-fly gui –> Pulseaudio (front end to ALSA)
If you need to change sound devices no gui –> ALSA
If you need easier surround sound –> ALSA
If you like command mode surround sound –> Try OSS
If you have an ISA sound device –> Try OSS then ALSA
If you need a sound modem (dial-up) plus normal sound out –> Likely to be ALSA
If you need to use a webcam builtin mic –> Try OSS then ALSA
If you need to play high quality sound files –> ALSA
If you have a Intel device, that needs a tweak –> ALSA

OSS is easier to setup, but fewer people use it so you may not get the support you are looking for. See surround sound for a link to a forum.

ALSA is better suited to those with “better” sound devices or multiple sound devices or
sound devices that need tweaked settings.

As I have an intel device, that needs a tweak, multichannel sliders do no appear in my ossxmix image as
OSS appears to not know how to handle my sound device.

However, OSS is still easiest of the the two to setup for persistence so try OSS first please unless my list rules
OSS out.

good luck and click here for ALSA wiki

When first loaded you may like to open a terminal and run command….ossinfo to see if your card is detected.

ossinfo
Version info: OSS 4.2 (b 2006/201202181035) (0x00040100) GPL
Platform: Linux/i686 3.0.21-tinycore #3021 SMP Sat Feb 18 11:54:11 EET 2012 (box)

Number of audio devices:	7
Number of audio engines:	11
Number of MIDI devices:		0
Number of mixer devices:	1

Device objects
 0: osscore0 OSS core services
 1: oss_hdaudio0 Intel HD Audio interrupts=428493 (431633)
    HD Audio controller Intel HD Audio
    Vendor ID    0x808627d8
    Subvendor ID 0x10192633
     Codec  0: STAC9221 (0x83847682/0x10192633)
 2: oss_usb0 USB audio core services

MIDI devices (/dev/midi*)

Mixer devices
 0: High Definition Audio STAC9221 (Mixer 0 of device object 1)

Audio devices
HD Audio play front               /dev/oss/oss_hdaudio0/pcm0  (device index 0)
HD Audio play center/LFE          /dev/oss/oss_hdaudio0/pcm1  (device index 1)
HD Audio play rear                /dev/oss/oss_hdaudio0/pcm2  (device index 2)
HD Audio play side                /dev/oss/oss_hdaudio0/pcm3  (device index 3)
HD Audio play spdif-out           /dev/oss/oss_hdaudio0/spdout0  (device index 4)
HD Audio rec rec1mux              /dev/oss/oss_hdaudio0/pcmin0  (device index 5)
HD Audio rec rec2mux              /dev/oss/oss_hdaudio0/pcmin1  (device index 6)

Nodes
  /dev/dsp -> /dev/oss/oss_hdaudio0/pcm0
  /dev/dsp_in -> /dev/oss/oss_hdaudio0/pcm0
  /dev/dsp_out -> /dev/oss/oss_hdaudio0/pcm0
  /dev/dsp_ac3 -> /dev/oss/oss_hdaudio0/spdout0
  /dev/dsp_mmap -> /dev/oss/oss_hdaudio0/pcm0
  /dev/dsp_multich -> /dev/oss/oss_hdaudio0/pcm0

If ok, you may wish to open cpanel…click on system stats then modules to see what modules are loaded.

You may like to navigate to /usr/lib/oss/conf and related folders to tweak any setting you may need

Newbies might like to install a gui mixer called ossxmix.tcz.

In the following image, I have ossxmix started and moved my media player, vlc over the mixer panel so I could snapshot my terminal showing the command to run, the mixer panel and my media player.

You may not have front connectors, as this is a tower and not a laptop.

The Master volume slider controls all.

Next image is un-ticked the channel lock so I can have different volumes left versus right.

If you run a media player gui, like vlc, you will need to tweak it to use OSS as that won't be its default.

If you have come from ALSA persistence, please remove all those settings as per ALSA wiki and do a full reboot before doing any OSS stuff please.

If you need OSS persistence use root powers to edit your

/opt/.filetool.lst to add line

If needed, add other conf lines to above file, if you needed to change any.

Then reboot, with backup, to test its ok.

Note, if you use a media player, gui, its settings are likely to be stored under /home/tc so no extra files need to be added to a standard TC user.

(warning …aus9 is not an oss or alsa expert)

Testing without reboot.
Open a terminal and run command

sudo soundoff

Make changes to /usr/lib/oss area then

sudo soundon

Try at own risk, please watch out for any typos in your backup .filetool.lst etc

If you know your sound card can do higher quality sound output tweak

Remove # so below line becomes active on next boot
src_quality=4

For those with high definition audio (intel), consider trying out a jack sense (3.55mm connector in the coloured holes)
hdaudio_jacksense=1

surround sound

OSS linux forum

Tips and Tricks

Trouble shooting

To get your webcam working in TC, is not fully discussed in this wiki.
For my cam, on an usb lead, I need to use a module called uvcvideo so its sufficient for me to load
v4l-dvb-3.0.21-tinycore.tcz

My cam does not appear in

/usr/lib/oss/etc/devices.list

As its on a lead, I did a full reboot and then usb webcam tab appears in mixer pane

The upstream maintainers - 4Front Technologies http://www.4front-tech.com/

TC maintainer - Curaga