You are here: welcome » wiki » install_with_partition_for_sharing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
wiki:install_with_partition_for_sharing [2011/05/15 06:02] – [Partitioning Programs] Guywiki:install_with_partition_for_sharing [2012/03/19 15:34] (current) – [Partition the USB Drive] BobBagwill
Line 1: Line 1:
 ====== Install Tinycore on a USB Drive with a Partition for Sharing Files with Windows ====== ====== Install Tinycore on a USB Drive with a Partition for Sharing Files with Windows ======
  
-This method may be used to install Tiny Core on a USB drive with a partition for sharing files with Windows.+This method may be used to install Tinycore on a USB drive with a partition for sharing files with Windows.
  
-When installing on a hard drive, a FAT32 partition may also be made for sharing files with Windows.+When installing on a hard drive, a partition may also be made for sharing files with Windows.
  
 Be aware: Older computers may not be able to start an operating system on a USB drive. Be aware: Older computers may not be able to start an operating system on a USB drive.
  
-==== Partitioning Applications ==== +==== Partition the USB Drive ====
- +
-There are many different partitioning applications.+
  
-GParted may be easier for new users.+An easy way for new users to partition a drive is using GParted. People connected to the internet may install GParted in Tinycore, and use it for partitioning. Others may download the latest version of [[Parted Magic]], and use it for partitioning.
  
-GParted can be installed in Tiny Core, and used for partitioning. +For more information, see [[partition|Partition a Drive to Install more than one Operating System]].
- +
-[[Parted Magic]] contains GParted, and may be used for partitioning.  +
- +
-==== Partition the USB Drive ====+
  
 Before partitioning the drive, save a copy of all files you want to keep. All files on the drive will be lost. Before partitioning the drive, save a copy of all files you want to keep. All files on the drive will be lost.
  
-Start the GParted Partition Editor.+  * Start the GParted Partition Editor. 
 +  * Be sure to select the correct drive. Warning: If you select the wrong drive, everything on that drive will be lost. 
 +  * Delete the existing partition. 
 +  * Make the first partition a FAT32 partition. You may not be able to access it from Windows if it is not the first partition. 
 +  * Make the rest of the drive an Ext2 partition.
  
-Be sure to select the correct drive. Warning: If you select the wrong drive, everything on that drive will be lost.+==== Install Tinycore ====
  
-Delete the existing partition.+Install Tinycore as explained in [[install_usb|Install Tinycore on a USB Drive]].
  
-Make the first partition a FAT32 partition. +During installation, select Existing Partition. Then select the Ext2 partition. It may be something like sda2, sdb2 or sdc2. Click on the square preceeding “Mark Partition Active (bootable)” so it becomes ticked.
  
-Make the rest of the drive an Ext2 partition.+==== Edit extlinux.conf ====
  
-Set the flag of the Ext2 partition to Boot or Active. +Even though Windows is not installed, during installation the installer will detect the fat32 partition, and set up boot menu to start Windows in that partition.
  
-==== Install Tiny Core ====+You can edit /mnt/sda1/boot/extlinux/extlinux.conf to remove this. If not sda1, use the correct partition.
  
-Install Tiny Core using one of these methods+You may remove
  
-  * [[install_usb_net|Install Tiny Core on a USB Drive with Internet]] +<code>UI vesamenu.c32 
-  * [[install_usb_offline|Install Tiny Core on a USB Drive without Internet]]+MENU TITLE Tiny Core Bootloader 
 +TIMEOUT 100</code>
  
-During installation select, Existing Partition. Then select the Ext2 partition. It may be something like sda2, sdb2 or sdc2. Click on the square preceeding “Mark Partition Active (bootable)” so it becomes ticked.+and 
 + 
 +<code>LABEL windows 
 +KERNEL chain.c32 
 +APPEND hd0 1</code>
  
 ==== Accessing the Partition ==== ==== Accessing the Partition ====
Line 46: Line 49:
 You may now save all files you want to share with Windows, in the FAT32 partition. You may now save all files you want to share with Windows, in the FAT32 partition.
  
-To access the partition from Tiny Core, you need to mount it. To mount the drive, start the mount tool. When the drive is unmounted, it is red. Click on it, so it becomes green.+To access the partition from Tinycore, you need to mount it. To mount the drive, start the mount tool. When the drive is unmounted, it is red. Click on it, so it becomes green.
  
 When running Windows, the partition will show up as an additional drive, such as D: or E: When running Windows, the partition will show up as an additional drive, such as D: or E:
Line 53: Line 56:
  
 To access files from both Linux and Windows applications, save in appropriate formats. For example, if you have a document created in Open Office, and want to access it with Microsoft Word, save it in a format which can be read by Microsoft Word. To access files from both Linux and Windows applications, save in appropriate formats. For example, if you have a document created in Open Office, and want to access it with Microsoft Word, save it in a format which can be read by Microsoft Word.
 +
 +==== Alternate Method: Use NTFS ====
 +
 +You may use NTFS instead of FAT32.
 +
 +FAT32 is limited to 4 gb files, so is not appropriate if you want to copy DVDs.
 +
 +However, some Linux distributions may not be set up to access NTFS. FAT32 is readily accessible.
  
Print/export
QR Code
QR Code wiki:install_with_partition_for_sharing (generated for current page)